This is the latest recevied telemetry packets stored in our database for station/object 9M2JHZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | HDOP* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774468049 | 3.46 V | 34 Pkts | 0.65 % | 0 | 0 |
| 1774467985 | 3.51 V | 38 Pkts | 0.57 % | 0 | 0 |
| 1774467921 | 3.46 V | 35 Pkts | 0.61 % | 0 | 0 |
| 1774467857 | 3.47 V | 36 Pkts | 0.83 % | 0 | 0 |
| 1774467793 | 3.47 V | 38 Pkts | 0.52 % | 0 | 0 |
| 1774467728 | 3.47 V | 38 Pkts | 0.59 % | 0 | 0 |
| 1774467665 | 3.47 V | 37 Pkts | 0.59 % | 0 | 0 |
| 1774467597 | 3.51 V | 38 Pkts | 0.57 % | 0 | 0 |
| 1774467532 | 3.46 V | 38 Pkts | 0.62 % | 0 | 0 |
| 1774467469 | 3.53 V | 34 Pkts | 0.66 % | 0 | 0 |
| 1774467340 | 3.47 V | 38 Pkts | 0.57 % | 0 | 0 |
| 1774467276 | 3.51 V | 38 Pkts | 0.65 % | 0 | 0 |
| 1774467209 | 3.29 V | 37 Pkts | 0.57 % | 0 | 0 |
| 1774467141 | 3.52 V | 36 Pkts | 0.83 % | 0 | 0 |
| 1774467077 | 3.51 V | 34 Pkts | 0.64 % | 0 | 0 |
| 1774467013 | 3.48 V | 36 Pkts | 0.57 % | 0 | 0 |
| 1774466949 | 3.52 V | 33 Pkts | 0.64 % | 0 | 0 |
| 1774466885 | 3.51 V | 35 Pkts | 0.67 % | 0 | 0 |
| 1774466821 | 3.52 V | 37 Pkts | 0.54 % | 0 | 0 |
| 1774466756 | 3.52 V | 34 Pkts | 0.66 % | 0 | 0 |
| 1774466689 | 3.51 V | 33 Pkts | 0.59 % | 0 | 0 |
| 1774466625 | 3.52 V | 36 Pkts | 0.57 % | 0 | 0 |
| 1774466557 | 3.53 V | 37 Pkts | 0.57 % | 0 | 0 |
| 1774466493 | 3.54 V | 35 Pkts | 0.61 % | 0 | 0 |
| 1774466429 | 3.52 V | 35 Pkts | 0.56 % | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Satellite: 0, 0.01, 0
HDOP: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)