This is the latest recevied telemetry packets stored in our database for station/object KJ0SHL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774501845 | 37.26 | 38.06 | -2.08 | 0 | 0 |
| 1774501246 | 37.26 | 38.06 | -2.08 | 0 | 0 |
| 1774500647 | 37.26 | 38.12 | -2.08 | 0 | 0 |
| 1774500047 | 37.35 | 38.12 | -2.08 | 0 | 0 |
| 1774499448 | 37.26 | 38.18 | -2.08 | 0 | 0 |
| 1774497653 | 37.35 | 38.3 | -2.08 | 0 | 0 |
| 1774497050 | 37.35 | 38.3 | -2.08 | 0 | 0 |
| 1774495851 | 37.35 | 38.43 | -2.08 | 0 | 0 |
| 1774495252 | 37.35 | 38.43 | -2.08 | 0 | 0 |
| 1774494053 | 37.35 | 38.55 | -2.08 | 0 | 0 |
| 1774493452 | 37.35 | 38.61 | -2.08 | 0 | 0 |
| 1774490452 | 37.35 | 38.85 | -2.08 | 0 | 0 |
| 1774489852 | 37.35 | 38.91 | -2.08 | 0 | 0 |
| 1774489251 | 37.35 | 38.97 | -2.08 | 0 | 0 |
| 1774488651 | 37.35 | 39.03 | -2.08 | 0 | 0 |
| 1774487451 | 37.35 | 39.16 | -2.08 | 0 | 0 |
| 1774485649 | 37.35 | 39.34 | -2.08 | 0 | 0 |
| 1774485048 | 37.71 | 39.64 | -2.08 | 0 | 0 |
| 1774484448 | 37.35 | 39.58 | -2.08 | 0 | 0 |
| 1774483847 | 37.35 | 39.58 | -2.08 | 0 | 0 |
| 1774483246 | 37.35 | 39.7 | -2.08 | 0 | 0 |
| 1774482646 | 37.35 | 39.7 | -2.08 | 0 | 0 |
| 1774481443 | 37.35 | 39.64 | -2.08 | 0 | 0 |
| 1774480841 | 37.35 | 39.58 | -2.08 | 0 | 0 |
| 1774478438 | 37.44 | 39.52 | -2.08 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.09, 0
Value2: 0, 0.0608, 0
Value3: 0, 0.0215, -2.08
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)