This is the latest recevied telemetry packets stored in our database for station/object HS4IOO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | CPU* |
|---|---|---|---|---|---|
| 1795104979 | 32.11 °C | 97.2 %RH | 1009.1 hPa | 4.18 V | 37 °C |
| 1795104379 | 31.97 °C | 97.2 %RH | 1009.1 hPa | 4.09 V | 37 °C |
| 1795103779 | 32.15 °C | 95.7 %RH | 1009.1 hPa | 4.11 V | 37 °C |
| 1795103179 | 32.4 °C | 93.2 %RH | 1009.1 hPa | 4.13 V | 37 °C |
| 1795102579 | 32.2 °C | 94.4 %RH | 1009.1 hPa | 4.11 V | 37 °C |
| 1795101979 | 32.66 °C | 92.2 %RH | 1009.1 hPa | 4.12 V | 38 °C |
| 1795101379 | 32.52 °C | 93.8 %RH | 1009 hPa | 4.1 V | 37 °C |
| 1795100779 | 32.79 °C | 92 %RH | 1009 hPa | 4.11 V | 37 °C |
| 1795100179 | 33 °C | 91.7 %RH | 1009 hPa | 4.18 V | 38 °C |
| 1795099579 | 32.61 °C | 93.9 %RH | 1008.9 hPa | 4.11 V | 38 °C |
| 1795098979 | 32.79 °C | 92.3 %RH | 1008.9 hPa | 4.13 V | 38 °C |
| 1795098379 | 32.34 °C | 94.6 %RH | 1008.8 hPa | 4.18 V | 38 °C |
| 1795097779 | 32.4 °C | 93.8 %RH | 1008.8 hPa | 4.1 V | 38 °C |
| 1795097179 | 32.49 °C | 92.6 %RH | 1008.8 hPa | 4.11 V | 37 °C |
| 1795096579 | 32.72 °C | 90.8 %RH | 1008.7 hPa | 4.11 V | 38 °C |
| 1795095979 | 33 °C | 88.2 %RH | 1008.6 hPa | 4.18 V | 38 °C |
| 1795095379 | 32.68 °C | 89.8 %RH | 1008.6 hPa | 4.17 V | 37 °C |
| 1795094779 | 32.72 °C | 89.8 %RH | 1008.4 hPa | 4.11 V | 38 °C |
| 1795094179 | 32.75 °C | 89 %RH | 1008.2 hPa | 4.18 V | 38 °C |
| 1795093579 | 32.68 °C | 89.8 %RH | 1008.1 hPa | 4.1 V | 37 °C |
| 1795092979 | 32.81 °C | 89.1 %RH | 1008 hPa | 4.11 V | 38 °C |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
CPU: 0, 0.01, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)