This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774479991 | 4.19 | 0 | 0 | 0 | 0 |
| 1774479089 | 4.19 | 0 | 0 | 0 | 0 |
| 1774478187 | 4.21 | 0 | 0 | 0 | 0 |
| 1774477285 | 4.19 | 0 | 0 | 0 | 0 |
| 1774476383 | 4.19 | 0 | 0 | 0 | 0 |
| 1774475481 | 4.19 | 0 | 0 | 0 | 0 |
| 1774474579 | 4.17 | 0 | 0 | 0 | 0 |
| 1774473811 | 4.17 | 0 | 0 | 0 | 0 |
| 1774473180 | 4.16 | 0 | 0 | 0 | 0 |
| 1774472278 | 4.14 | 0 | 0 | 0 | 0 |
| 1774471376 | 4.1 | 0 | 0 | 0 | 0 |
| 1774470474 | 4.07 | 0 | 0 | 0 | 0 |
| 1774470213 | 4.05 | 0 | 0 | 0 | 0 |
| 1774469970 | 3.93 | 0 | 0 | 0 | 0 |
| 1774469712 | 3.92 | 0 | 0 | 0 | 0 |
| 1774468811 | 3.94 | 0 | 0 | 0 | 0 |
| 1774467908 | 3.94 | 0 | 0 | 0 | 0 |
| 1774467253 | 3.94 | 0 | 0 | 0 | 0 |
| 1774466351 | 3.94 | 0 | 0 | 0 | 0 |
| 1774465449 | 3.95 | 0 | 0 | 0 | 0 |
| 1774464547 | 3.96 | 0 | 0 | 0 | 0 |
| 1774463645 | 3.96 | 0 | 0 | 0 | 0 |
| 1774462743 | 3.96 | 0 | 0 | 0 | 0 |
| 1774461841 | 3.97 | 0 | 0 | 0 | 0 |
| 1774460939 | 3.97 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)