This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774507461 | 456 Volts | 574 Deg.F | 0 | 0 | 0 |
| 1774506565 | 443 Volts | 575 Deg.F | 0 | 0 | 0 |
| 1774505668 | 456 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1774504772 | 458 Volts | 575 Deg.F | 0 | 0 | 0 |
| 1774502980 | 457 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1774502083 | 457 Volts | 575 Deg.F | 0 | 0 | 0 |
| 1774501187 | 443 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1774500290 | 457 Volts | 577 Deg.F | 0 | 0 | 0 |
| 1774499393 | 459 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1774498497 | 444 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1774497601 | 457 Volts | 577 Deg.F | 0 | 0 | 0 |
| 1774496704 | 460 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1774495808 | 447 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1774494912 | 449 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1774494015 | 501 Volts | 577 Deg.F | 0 | 0 | 0 |
| 1774493119 | 455 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1774492222 | 443 Volts | 577 Deg.F | 0 | 0 | 0 |
| 1774491326 | 455 Volts | 578 Deg.F | 0 | 0 | 0 |
| 1774490430 | 465 Volts | 578 Deg.F | 0 | 0 | 0 |
| 1774489533 | 446 Volts | 578 Deg.F | 0 | 0 | 0 |
| 1774488637 | 461 Volts | 580 Deg.F | 0 | 0 | 0 |
| 1774487741 | 457 Volts | 579 Deg.F | 0 | 0 | 0 |
| 1774486844 | 444 Volts | 580 Deg.F | 0 | 0 | 0 |
| 1774485948 | 456 Volts | 581 Deg.F | 0 | 0 | 0 |
| 1774485052 | 464 Volts | 582 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)