This is the latest recevied telemetry packets stored in our database for station/object F4GCF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774512327 | 0 Count | 609 Count | 219 Count | 0 VDC | 0 VDC |
| 1774511727 | 0 Count | 601 Count | 214 Count | 0 VDC | 0 VDC |
| 1774511127 | 0 Count | 590 Count | 209 Count | 0 VDC | 0 VDC |
| 1774510527 | 0 Count | 581 Count | 206 Count | 0 VDC | 0 VDC |
| 1774509927 | 0 Count | 563 Count | 200 Count | 0 VDC | 0 VDC |
| 1774509326 | 0 Count | 551 Count | 195 Count | 0 VDC | 0 VDC |
| 1774508726 | 0 Count | 541 Count | 192 Count | 0 VDC | 0 VDC |
| 1774508126 | 0 Count | 526 Count | 187 Count | 0 VDC | 0 VDC |
| 1774507526 | 0 Count | 514 Count | 184 Count | 0 VDC | 0 VDC |
| 1774506926 | 0 Count | 506 Count | 182 Count | 0 VDC | 0 VDC |
| 1774506326 | 0 Count | 494 Count | 175 Count | 0 VDC | 0 VDC |
| 1774505726 | 0 Count | 481 Count | 170 Count | 0 VDC | 0 VDC |
| 1774505126 | 0 Count | 469 Count | 167 Count | 0 VDC | 0 VDC |
| 1774504525 | 0 Count | 448 Count | 159 Count | 0 VDC | 0 VDC |
| 1774503925 | 0 Count | 434 Count | 153 Count | 0 VDC | 0 VDC |
| 1774503325 | 0 Count | 423 Count | 150 Count | 0 VDC | 0 VDC |
| 1774502725 | 0 Count | 409 Count | 145 Count | 0 VDC | 0 VDC |
| 1774502125 | 0 Count | 393 Count | 139 Count | 0 VDC | 0 VDC |
| 1774501525 | 0 Count | 384 Count | 136 Count | 0 VDC | 0 VDC |
| 1774500925 | 0 Count | 365 Count | 128 Count | 0 VDC | 0 VDC |
| 1774500325 | 0 Count | 354 Count | 123 Count | 0 VDC | 0 VDC |
| 1774499725 | 0 Count | 344 Count | 120 Count | 0 VDC | 0 VDC |
| 1774499125 | 0 Count | 329 Count | 114 Count | 0 VDC | 0 VDC |
| 1774498525 | 0 Count | 316 Count | 108 Count | 0 VDC | 0 VDC |
| 1774497924 | 0 Count | 308 Count | 106 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)