This is the latest recevied telemetry packets stored in our database for station/object F5UGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774462374 | 37 Count | 103 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1774460572 | 36 Count | 103 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1774458769 | 35 Count | 100 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1774456966 | 34 Count | 97 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1774455164 | 33 Count | 94 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1774453361 | 32 Count | 93 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1774451559 | 31 Count | 90 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1774449756 | 30 Count | 88 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1774447985 | 29 Count | 86 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1774446182 | 28 Count | 82 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1774444379 | 27 Count | 81 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1774442576 | 26 Count | 77 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1774440774 | 25 Count | 74 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1774438971 | 24 Count | 70 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1774437168 | 23 Count | 66 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1774435365 | 22 Count | 62 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1774433563 | 21 Count | 59 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1774431760 | 20 Count | 57 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1774429957 | 19 Count | 55 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1774428154 | 18 Count | 55 Count | 0 Count | 4.21 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)