This is the latest recevied telemetry packets stored in our database for station/object KG7SS-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774468757 | 440 | 625 | 0 | 0 | 0 |
| 1774468637 | 442 | 625 | 0 | 0 | 0 |
| 1774468517 | 441 | 624 | 0 | 0 | 0 |
| 1774468398 | 442 | 624 | 0 | 0 | 0 |
| 1774468278 | 441 | 624 | 0 | 0 | 0 |
| 1774468158 | 451 | 624 | 0 | 0 | 0 |
| 1774468038 | 452 | 623 | 0 | 0 | 0 |
| 1774467680 | 450 | 621 | 0 | 0 | 0 |
| 1774467560 | 450 | 619 | 0 | 0 | 0 |
| 1774467440 | 452 | 619 | 0 | 0 | 0 |
| 1774467321 | 450 | 617 | 0 | 0 | 0 |
| 1774467201 | 451 | 615 | 0 | 0 | 0 |
| 1774467082 | 445 | 612 | 0 | 0 | 0 |
| 1774466962 | 411 | 609 | 0 | 0 | 0 |
| 1774466843 | 409 | 604 | 0 | 0 | 0 |
| 1774458643 | 410 | 623 | 0 | 0 | 0 |
| 1774458643 | 409 | 623 | 0 | 0 | 0 |
| 1774458447 | 410 | 623 | 0 | 0 | 0 |
| 1774458327 | 409 | 623 | 0 | 0 | 0 |
| 1774458208 | 409 | 623 | 0 | 0 | 0 |
| 1774458088 | 414 | 623 | 0 | 0 | 0 |
| 1774457968 | 409 | 622 | 0 | 0 | 0 |
| 1774457849 | 410 | 623 | 0 | 0 | 0 |
| 1774457730 | 435 | 622 | 0 | 0 | 0 |
| 1774457611 | 414 | 622 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)