This is the latest recevied telemetry packets stored in our database for station/object SP6ZWR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774511361 | 34.2 C | 20.42 % | 1017 hPa | 0 | 0 |
| 1774511291 | 33.7 C | 20.52 % | 1009 hPa | 0 | 0 |
| 1774511257 | 33.3 C | 21.72 % | 1008.63 hPa | 0 | 0 |
| 1774511178 | 32.8 C | 21.47 % | 1008.75 hPa | 0 | 0 |
| 1774511084 | 32.4 C | 21.38 % | 1009.75 hPa | 0 | 0 |
| 1774511037 | 31.9 C | 22.57 % | 1009.63 hPa | 0 | 0 |
| 1774510991 | 31.3 C | 22.44 % | 1008.25 hPa | 0 | 0 |
| 1774510966 | 31.3 C | 22.44 % | 1009.63 hPa | 0 | 0 |
| 1774510838 | 29.8 C | 24.4 % | 1008.25 hPa | 0 | 0 |
| 1774510803 | 28.3 C | 25.35 % | 1008.88 hPa | 0 | 0 |
| 1774510727 | 27.1 C | 25.78 % | 1008.13 hPa | 0 | 0 |
| 1774510383 | 29.6 C | 24.48 % | 1008.75 hPa | 0 | 0 |
| 1774510307 | 29.1 C | 24.47 % | 1008 hPa | 0 | 0 |
| 1774510222 | 28 C | 25.31 % | 1007.38 hPa | 0 | 0 |
| 1774510209 | 28 C | 25.31 % | 1007.5 hPa | 0 | 0 |
| 1774510176 | 28 C | 25.31 % | 1008.25 hPa | 0 | 0 |
| 1774510161 | 27.4 C | 25.53 % | 1008.25 hPa | 0 | 0 |
| 1774510116 | 27.4 C | 25.53 % | 1008.38 hPa | 0 | 0 |
| 1774510078 | 26.8 C | 26.09 % | 1009.13 hPa | 0 | 0 |
| 1774510049 | 26.8 C | 26.09 % | 1008.38 hPa | 0 | 0 |
| 1774510032 | 26.2 C | 26.56 % | 1008.13 hPa | 0 | 0 |
| 1774509926 | 25.5 C | 26.97 % | 1008.75 hPa | 0 | 0 |
| 1774509775 | 23.3 C | 27.55 % | 1008.25 hPa | 0 | 0 |
| 1774509554 | 20.9 C | 28.74 % | 1009.88 hPa | 0 | 0 |
| 1774509433 | 18.8 C | 30 % | 1008.88 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)