This is the latest recevied telemetry packets stored in our database for station/object BG2VZP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774468728 | 8 | 183 | 1003 | 1149 | 0 |
| 1774465699 | 8 | 180 | 1003 | 1149 | 0 |
| 1774462668 | 9 | 189 | 1003 | 1149 | 0 |
| 1774459638 | 9 | 209 | 1003 | 1146 | 0 |
| 1774456612 | 9 | 207 | 1003 | 1149 | 0 |
| 1774453585 | 8 | 203 | 1004 | 1152 | 0 |
| 1774450562 | 9 | 200 | 1003 | 1149 | 0 |
| 1774447538 | 9 | 208 | 1003 | 1149 | 0 |
| 1774444522 | 9 | 215 | 1003 | 1149 | 0 |
| 1774441504 | 8 | 220 | 1003 | 1149 | 0 |
| 1774438494 | 9 | 243 | 1002 | 1149 | 0 |
| 1774435478 | 9 | 253 | 1002 | 1146 | 0 |
| 1774432464 | 11 | 268 | 1001 | 1149 | 0 |
| 1774429428 | 9 | 288 | 1001 | 1149 | 0 |
| 1774426414 | 10 | 348 | 1001 | 1149 | 0 |
| 1774423404 | 11 | 348 | 1001 | 1149 | 0 |
| 1774420388 | 10 | 397 | 1001 | 1149 | 0 |
| 1774417342 | 7 | 379 | 1001 | 1149 | 0 |
| 1774414318 | 9 | 368 | 1001 | 1146 | 0 |
| 1774411284 | 11 | 344 | 1001 | 1152 | 0 |
| 1774408264 | 10 | 326 | 1002 | 1146 | 0 |
| 1774405216 | 9 | 312 | 1002 | 1149 | 0 |
| 1774402150 | 9 | 273 | 1002 | 1149 | 0 |
| 1774399094 | 7 | 248 | 1002 | 1149 | 0 |
| 1774396025 | 10 | 229 | 1001 | 1149 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)