This is the latest recevied telemetry packets stored in our database for station/object BURNTM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774494165 | 412 | 64 | 0 | 0 | 0 |
| 1774493561 | 412 | 65 | 0 | 0 | 0 |
| 1774492961 | 412 | 65 | 0 | 0 | 0 |
| 1774492361 | 412 | 66 | 0 | 0 | 0 |
| 1774491765 | 412 | 71 | 0 | 0 | 0 |
| 1774491161 | 412 | 110 | 0 | 0 | 0 |
| 1774490561 | 413 | 265 | 0 | 0 | 0 |
| 1774489961 | 413 | 244 | 0 | 0 | 0 |
| 1774489361 | 413 | 624 | 0 | 0 | 0 |
| 1774488761 | 414 | 709 | 0 | 0 | 0 |
| 1774488161 | 414 | 780 | 0 | 0 | 0 |
| 1774487561 | 414 | 815 | 0 | 0 | 0 |
| 1774486961 | 414 | 838 | 0 | 0 | 0 |
| 1774486361 | 414 | 856 | 0 | 0 | 0 |
| 1774485764 | 414 | 870 | 0 | 0 | 0 |
| 1774485159 | 414 | 882 | 0 | 0 | 0 |
| 1774484559 | 414 | 918 | 0 | 0 | 0 |
| 1774483958 | 415 | 954 | 0 | 0 | 0 |
| 1774482758 | 415 | 1002 | 0 | 0 | 0 |
| 1774482159 | 415 | 1022 | 0 | 0 | 0 |
| 1774481556 | 417 | 1032 | 0 | 0 | 0 |
| 1774480356 | 416 | 1045 | 0 | 0 | 0 |
| 1774479755 | 417 | 1044 | 0 | 0 | 0 |
| 1774479155 | 417 | 1054 | 0 | 0 | 0 |
| 1774478552 | 418 | 1057 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)