This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774501839 | 72 Count | 159 Count | 66 Count | 4.12 VDC | 0 VDC |
| 1774500938 | 65 Count | 147 Count | 60 Count | 4.12 VDC | 0 VDC |
| 1774500037 | 55 Count | 108 Count | 51 Count | 4.12 VDC | 0 VDC |
| 1774499136 | 27 Count | 63 Count | 24 Count | 4.12 VDC | 0 VDC |
| 1774498236 | 20 Count | 41 Count | 18 Count | 4.12 VDC | 0 VDC |
| 1774497335 | 13 Count | 29 Count | 12 Count | 4.12 VDC | 0 VDC |
| 1774496434 | 6 Count | 14 Count | 6 Count | 4.12 VDC | 0 VDC |
| 1774495533 | 433 Count | 1003 Count | 377 Count | 4.12 VDC | 0 VDC |
| 1774494632 | 427 Count | 993 Count | 372 Count | 4.12 VDC | 0 VDC |
| 1774493732 | 420 Count | 981 Count | 366 Count | 4.12 VDC | 0 VDC |
| 1774492831 | 414 Count | 970 Count | 361 Count | 4.12 VDC | 0 VDC |
| 1774491930 | 407 Count | 958 Count | 355 Count | 4.12 VDC | 0 VDC |
| 1774491029 | 401 Count | 948 Count | 350 Count | 4.12 VDC | 0 VDC |
| 1774490128 | 394 Count | 936 Count | 344 Count | 4.12 VDC | 0 VDC |
| 1774489227 | 387 Count | 922 Count | 338 Count | 4.12 VDC | 0 VDC |
| 1774488326 | 380 Count | 910 Count | 332 Count | 4.12 VDC | 0 VDC |
| 1774487425 | 374 Count | 901 Count | 327 Count | 4.12 VDC | 0 VDC |
| 1774486525 | 367 Count | 889 Count | 321 Count | 4.13 VDC | 0 VDC |
| 1774485624 | 361 Count | 874 Count | 316 Count | 4.22 VDC | 0 VDC |
| 1774484723 | 350 Count | 858 Count | 306 Count | 4.23 VDC | 0 VDC |
| 1774483822 | 344 Count | 848 Count | 301 Count | 4.23 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)