This is the latest recevied telemetry packets stored in our database for station/object WHTANK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774481141 | 419 | 1078 | 0 | 0 | 0 |
| 1774480541 | 419 | 1079 | 0 | 0 | 0 |
| 1774479941 | 419 | 1084 | 0 | 0 | 0 |
| 1774479341 | 419 | 1087 | 0 | 0 | 0 |
| 1774478740 | 419 | 1085 | 0 | 0 | 0 |
| 1774478140 | 419 | 1082 | 0 | 0 | 0 |
| 1774477540 | 419 | 1092 | 0 | 0 | 0 |
| 1774476939 | 419 | 1094 | 0 | 0 | 0 |
| 1774476339 | 419 | 1078 | 0 | 0 | 0 |
| 1774475741 | 419 | 1069 | 0 | 0 | 0 |
| 1774475138 | 419 | 1091 | 0 | 0 | 0 |
| 1774474537 | 419 | 1087 | 0 | 0 | 0 |
| 1774473936 | 419 | 1066 | 0 | 0 | 0 |
| 1774473335 | 419 | 1060 | 0 | 0 | 0 |
| 1774472735 | 419 | 1069 | 0 | 0 | 0 |
| 1774472135 | 419 | 1072 | 0 | 0 | 0 |
| 1774471534 | 420 | 1081 | 0 | 0 | 0 |
| 1774470937 | 420 | 1071 | 0 | 0 | 0 |
| 1774470333 | 420 | 1079 | 0 | 0 | 0 |
| 1774469733 | 420 | 1077 | 0 | 0 | 0 |
| 1774469133 | 420 | 1079 | 0 | 0 | 0 |
| 1774468537 | 421 | 1078 | 0 | 0 | 0 |
| 1774467933 | 420 | 1076 | 0 | 0 | 0 |
| 1774467335 | 420 | 1078 | 0 | 0 | 0 |
| 1774466733 | 421 | 1072 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)