This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774605030 | 77 Count | 302 Count | 45 Count | 0 VDC | 0.08 VDC |
| 1774604122 | 74 Count | 288 Count | 43 Count | 0 VDC | 0.08 VDC |
| 1774603219 | 71 Count | 278 Count | 41 Count | 0 VDC | 0.08 VDC |
| 1774602316 | 69 Count | 269 Count | 40 Count | 0 VDC | 0.08 VDC |
| 1774601418 | 66 Count | 255 Count | 38 Count | 0 VDC | 0.08 VDC |
| 1774600511 | 63 Count | 242 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1774599607 | 61 Count | 225 Count | 35 Count | 0 VDC | 0.08 VDC |
| 1774598704 | 59 Count | 220 Count | 34 Count | 0 VDC | 0.08 VDC |
| 1774597801 | 56 Count | 212 Count | 32 Count | 0 VDC | 0.08 VDC |
| 1774596898 | 54 Count | 200 Count | 31 Count | 0 VDC | 0.08 VDC |
| 1774595995 | 52 Count | 195 Count | 30 Count | 0 VDC | 0.08 VDC |
| 1774595092 | 49 Count | 185 Count | 28 Count | 0 VDC | 0.08 VDC |
| 1774594189 | 47 Count | 173 Count | 27 Count | 0 VDC | 0.08 VDC |
| 1774593286 | 44 Count | 162 Count | 25 Count | 0 VDC | 0.08 VDC |
| 1774592385 | 40 Count | 143 Count | 22 Count | 0 VDC | 0.08 VDC |
| 1774590577 | 35 Count | 123 Count | 19 Count | 0 VDC | 0.08 VDC |
| 1774589674 | 32 Count | 109 Count | 17 Count | 0 VDC | 0.08 VDC |
| 1774588771 | 29 Count | 98 Count | 15 Count | 0 VDC | 0.08 VDC |
| 1774587868 | 27 Count | 90 Count | 14 Count | 0 VDC | 0.08 VDC |
| 1774586965 | 24 Count | 82 Count | 12 Count | 0 VDC | 0.08 VDC |
| 1774586062 | 21 Count | 71 Count | 10 Count | 0 VDC | 0.08 VDC |
| 1774585159 | 19 Count | 61 Count | 9 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)