This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774469211 | 451 Count | 1026 Count | 403 Count | 4.05 VDC | 0 VDC |
| 1774468310 | 443 Count | 1000 Count | 396 Count | 4.06 VDC | 0 VDC |
| 1774467410 | 434 Count | 982 Count | 388 Count | 4.04 VDC | 0 VDC |
| 1774466509 | 424 Count | 955 Count | 379 Count | 4.07 VDC | 0 VDC |
| 1774465608 | 414 Count | 933 Count | 370 Count | 4.07 VDC | 0 VDC |
| 1774464707 | 404 Count | 905 Count | 361 Count | 4.07 VDC | 0 VDC |
| 1774463807 | 397 Count | 896 Count | 355 Count | 4.08 VDC | 0 VDC |
| 1774462906 | 387 Count | 873 Count | 346 Count | 4.08 VDC | 0 VDC |
| 1774461104 | 368 Count | 819 Count | 329 Count | 4.09 VDC | 0 VDC |
| 1774460205 | 359 Count | 791 Count | 321 Count | 4.1 VDC | 0 VDC |
| 1774459303 | 348 Count | 762 Count | 311 Count | 4.1 VDC | 0 VDC |
| 1774458402 | 338 Count | 744 Count | 302 Count | 4.11 VDC | 0 VDC |
| 1774457502 | 329 Count | 728 Count | 294 Count | 4.11 VDC | 0 VDC |
| 1774456600 | 320 Count | 708 Count | 286 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)