This is the latest recevied telemetry packets stored in our database for station/object YE3ESW-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Hum* | Pres* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795102342 | 35 °C | 32 %RH | 1013 hPa | 0 | 0 |
| 1795101562 | 35 °C | 33 %RH | 1013 hPa | 0 | 0 |
| 1795100886 | 36 °C | 32 %RH | 1013 hPa | 0 | 0 |
| 1795100841 | 36 °C | 32 %RH | 1013 hPa | 0 | 0 |
| 1795100796 | 36 °C | 32 %RH | 1013 hPa | 0 | 0 |
| 1795099925 | 36 °C | 34 %RH | 1013 hPa | 0 | 0 |
| 1795099662 | 36 °C | 34 %RH | 1013 hPa | 0 | 0 |
| 1795097762 | 38 °C | 36 %RH | 1014 hPa | 0 | 0 |
| 1795093961 | 38 °C | 36 %RH | 1013 hPa | 0 | 0 |
| 1795092061 | 38 °C | 36 %RH | 1013 hPa | 0 | 0 |
| 1795090161 | 38 °C | 35 %RH | 1012 hPa | 0 | 0 |
| 1795088261 | 38 °C | 35 %RH | 1011 hPa | 0 | 0 |
| 1795086361 | 38 °C | 34 %RH | 1011 hPa | 0 | 0 |
| 1795084461 | 38 °C | 32 %RH | 1011 hPa | 0 | 0 |
| 1795082561 | 38 °C | 33 %RH | 1011 hPa | 0 | 0 |
| 1795080661 | 37 °C | 43 %RH | 1010 hPa | 0 | 0 |
| 1795078761 | 37 °C | 42 %RH | 1010 hPa | 0 | 0 |
| 1795074961 | 40 °C | 36 %RH | 1009 hPa | 0 | 0 |
| 1795071161 | 39 °C | 38 %RH | 1009 hPa | 0 | 0 |
| 1795069261 | 39 °C | 38 %RH | 1010 hPa | 0 | 0 |
| 1795063559 | 40 °C | 37 %RH | 1010 hPa | 0 | 0 |
| 1795061659 | 40 °C | 37 %RH | 1011 hPa | 0 | 0 |
| 1795060032 | 39 °C | 37 %RH | 1012 hPa | 0 | 0 |
| 1795058132 | 39 °C | 38 %RH | 1012 hPa | 0 | 0 |
| 1795056233 | 39 °C | 37 %RH | 1012 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Hum: 0, 1, 0
Pres: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)