This is the latest recevied telemetry packets stored in our database for station/object SQ3NVZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774718964 | 205 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774717162 | 201 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774715361 | 197 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774713560 | 193 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774711759 | 189 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774709958 | 185 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774708156 | 181 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774706355 | 177 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774704554 | 172 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774702752 | 167 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774700951 | 154 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774699150 | 150 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774697348 | 146 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774695547 | 142 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774693746 | 138 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774691945 | 134 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774690143 | 130 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774688343 | 123 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774686541 | 117 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774684740 | 113 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774682939 | 109 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774681138 | 105 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774679336 | 101 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)