APRS HamBand

☰

reset

YC0TBU-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Satellite*	HDOP*	Value3*	Value4*	Value5*
1774453778	12 Sat	0 DOP	0	0	0
1774452556	12 Sat	0 DOP	0	0	0
1774451335	12 Sat	0 DOP	0	0	0
1774450115	12 Sat	0 DOP	0	0	0
1774448894	12 Sat	0 DOP	0	0	0
1774447672	12 Sat	0 DOP	0	0	0
1774446453	12 Sat	0 DOP	0	0	0
1774445231	12 Sat	0 DOP	0	0	0
1774444009	12 Sat	0 DOP	0	0	0
1774442790	12 Sat	0 DOP	0	0	0
1774441569	12 Sat	0 DOP	0	0	0
1774440346	12 Sat	0 DOP	0	0	0
1774439127	12 Sat	0 DOP	0	0	0
1774437905	12 Sat	0 DOP	0	0	0
1774436684	12 Sat	0 DOP	0	0	0
1774435464	12 Sat	0 DOP	0	0	0
1774434243	12 Sat	0 DOP	0	0	0
1774433021	12 Sat	0 DOP	0	0	0
1774431802	12 Sat	0 DOP	0	0	0
1774430580	12 Sat	0 DOP	0	0	0
1774429358	12 Sat	0 DOP	0	0	0
1774428139	12 Sat	0 DOP	0	0	0
1774426918	12 Sat	0 DOP	0	0	0
1774425697	12 Sat	0 DOP	0	0	0
1774424476	12 Sat	0 DOP	0	0	0

*Used Equation Coefficients:

Satellite: 0, 1, 0

HDOP: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Maintained by Marcin, SP0KS, based on APRS Track Direct