This is the latest recevied telemetry packets stored in our database for station/object YE2YE-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774890400 | 33 °C | 60 %RH | 1010 hPa | 0 | 0 |
| 1774880952 | 33 °C | 57 %RH | 1009 hPa | 0 | 0 |
| 1774880314 | 30 °C | 70 %RH | 1010 hPa | 0 | 0 |
| 1774879077 | 33 °C | 57 %RH | 1009 hPa | 0 | 0 |
| 1774877202 | 33 °C | 55 %RH | 1009 hPa | 0 | 0 |
| 1774875327 | 33 °C | 57 %RH | 1009 hPa | 0 | 0 |
| 1774873452 | 33 °C | 58 %RH | 1008 hPa | 0 | 0 |
| 1774871577 | 33 °C | 56 %RH | 1008 hPa | 0 | 0 |
| 1774869702 | 34 °C | 55 %RH | 1008 hPa | 0 | 0 |
| 1774867827 | 34 °C | 55 %RH | 1007 hPa | 0 | 0 |
| 1774865952 | 34 °C | 55 %RH | 1007 hPa | 0 | 0 |
| 1774864077 | 35 °C | 52 %RH | 1006 hPa | 0 | 0 |
| 1774862202 | 34 °C | 52 %RH | 1005 hPa | 0 | 0 |
| 1774860327 | 34 °C | 49 %RH | 1005 hPa | 0 | 0 |
| 1774858452 | 34 °C | 47 %RH | 1006 hPa | 0 | 0 |
| 1774856577 | 38 °C | 46 %RH | 1005 hPa | 0 | 0 |
| 1774854702 | 38 °C | 44 %RH | 1005 hPa | 0 | 0 |
| 1774852827 | 39 °C | 45 %RH | 1005 hPa | 0 | 0 |
| 1774850952 | 38 °C | 46 %RH | 1006 hPa | 0 | 0 |
| 1774849077 | 38 °C | 46 %RH | 1006 hPa | 0 | 0 |
| 1774847202 | 39 °C | 45 %RH | 1007 hPa | 0 | 0 |
| 1774845327 | 38 °C | 44 %RH | 1008 hPa | 0 | 0 |
| 1774843453 | 37 °C | 44 %RH | 1008 hPa | 0 | 0 |
| 1774841577 | 37 °C | 45 %RH | 1009 hPa | 0 | 0 |
| 1774839703 | 36 °C | 48 %RH | 1009 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)