This is the latest recevied telemetry packets stored in our database for station/object KF4KUL-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774515908 | 399 | 610 | 0 | 0 | 0 |
| 1774514116 | 399 | 610 | 0 | 0 | 0 |
| 1774512324 | 399 | 611 | 0 | 0 | 0 |
| 1774510532 | 400 | 611 | 0 | 0 | 0 |
| 1774508739 | 400 | 612 | 0 | 0 | 0 |
| 1774506947 | 400 | 613 | 0 | 0 | 0 |
| 1774505154 | 400 | 614 | 0 | 0 | 0 |
| 1774503361 | 400 | 615 | 0 | 0 | 0 |
| 1774501568 | 400 | 616 | 0 | 0 | 0 |
| 1774499775 | 400 | 616 | 0 | 0 | 0 |
| 1774497981 | 400 | 617 | 0 | 0 | 0 |
| 1774496188 | 405 | 621 | 0 | 0 | 0 |
| 1774494395 | 401 | 620 | 0 | 0 | 0 |
| 1774492602 | 401 | 621 | 0 | 0 | 0 |
| 1774490808 | 401 | 623 | 0 | 0 | 0 |
| 1774489014 | 402 | 625 | 0 | 0 | 0 |
| 1774487221 | 401 | 627 | 0 | 0 | 0 |
| 1774485427 | 401 | 629 | 0 | 0 | 0 |
| 1774481837 | 402 | 636 | 0 | 0 | 0 |
| 1774480042 | 403 | 640 | 0 | 0 | 0 |
| 1774478246 | 403 | 644 | 0 | 0 | 0 |
| 1774476449 | 403 | 648 | 0 | 0 | 0 |
| 1774474652 | 404 | 655 | 0 | 0 | 0 |
| 1774472854 | 405 | 653 | 0 | 0 | 0 |
| 1774471056 | 405 | 653 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)