This is the latest recevied telemetry packets stored in our database for station/object N3RPH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774494168 | 1324 | 38 | 0 | 0 | 0 |
| 1774492968 | 1324 | 43 | 0 | 0 | 0 |
| 1774491767 | 1324 | 48 | 0 | 0 | 0 |
| 1774490568 | 1324 | 53 | 0 | 0 | 0 |
| 1774489367 | 1324 | 53 | 0 | 0 | 0 |
| 1774488168 | 1324 | 50 | 0 | 0 | 0 |
| 1774486969 | 1324 | 47 | 0 | 0 | 0 |
| 1774485769 | 1324 | 49 | 0 | 0 | 0 |
| 1774484568 | 1325 | 52 | 0 | 0 | 0 |
| 1774483368 | 1324 | 64 | 0 | 0 | 0 |
| 1774482169 | 1324 | 62 | 0 | 0 | 0 |
| 1774480968 | 1324 | 55 | 0 | 0 | 0 |
| 1774479767 | 1326 | 46 | 0 | 0 | 0 |
| 1774478567 | 1326 | 47 | 0 | 0 | 0 |
| 1774477369 | 1326 | 53 | 0 | 0 | 0 |
| 1774476167 | 1326 | 57 | 0 | 0 | 0 |
| 1774473769 | 1326 | 72 | 0 | 0 | 0 |
| 1774472568 | 1326 | 75 | 0 | 0 | 0 |
| 1774471367 | 1327 | 64 | 0 | 0 | 0 |
| 1774470167 | 1327 | 50 | 0 | 0 | 0 |
| 1774468968 | 1327 | 44 | 0 | 0 | 0 |
| 1774467768 | 1331 | 54 | 0 | 0 | 0 |
| 1774466569 | 1358 | 56 | 0 | 0 | 0 |
| 1774465368 | 1439 | 53 | 0 | 0 | 0 |
| 1774464168 | 1369 | 45 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)