This is the latest recevied telemetry packets stored in our database for station/object DL0PCN-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775474102 | 3995 | 0 | 136 | 1183 | 8118 |
| 1775473940 | 3990 | 0 | 110 | 1173 | 8118 |
| 1775473799 | 3993 | 0 | 98 | 1170 | 8119 |
| 1775473498 | 3993 | 0 | 115 | 1170 | 8119 |
| 1775473444 | 3998 | 0 | 119 | 1167 | 8118 |
| 1775473354 | 3994 | 0 | 120 | 1158 | 8118 |
| 1775473211 | 3991 | 0 | 120 | 1178 | 8119 |
| 1775473071 | 3993 | 0 | 123 | 1171 | 8118 |
| 1775472927 | 3994 | 0 | 136 | 1297 | 8118 |
| 1775472851 | 3994 | 0 | 79 | 1297 | 8118 |
| 1775472824 | 3994 | 0 | 177 | 1297 | 8118 |
| 1775472654 | 3994 | 0 | 79 | 1297 | 8118 |
| 1775472414 | 3994 | 0 | 136 | 1256 | 8117 |
| 1775472363 | 3996 | 0 | 108 | 1252 | 8118 |
| 1775472270 | 3997 | 0 | 150 | 1330 | 8119 |
| 1775472132 | 3997 | 0 | 141 | 1330 | 8119 |
| 1775471989 | 3996 | 0 | 140 | 1313 | 8120 |
| 1775471846 | 3991 | 0 | 115 | 1292 | 8120 |
| 1775471702 | 3992 | 0 | 90 | 1172 | 8119 |
| 1775471537 | 3992 | 0 | 117 | 1172 | 8119 |
| 1775471417 | 3991 | 0 | 124 | 1202 | 8119 |
| 1775471315 | 3994 | 0 | 126 | 1220 | 8119 |
| 1775471273 | 3995 | 0 | 134 | 1226 | 8120 |
| 1775471131 | 3994 | 0 | 134 | 1346 | 8119 |
| 1775470990 | 3996 | 0 | 131 | 1329 | 8119 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)