This is the latest recevied telemetry packets stored in our database for station/object N4VVV-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774711795 | 433 | 615 | 0 | 0 | 0 |
| 1774711703 | 435 | 616 | 0 | 0 | 0 |
| 1774711609 | 434 | 616 | 0 | 0 | 0 |
| 1774711277 | 433 | 616 | 0 | 0 | 0 |
| 1774710734 | 433 | 614 | 0 | 0 | 0 |
| 1774710551 | 435 | 613 | 0 | 0 | 0 |
| 1774710537 | 435 | 613 | 0 | 0 | 0 |
| 1774710522 | 438 | 614 | 0 | 0 | 0 |
| 1774710465 | 434 | 612 | 0 | 0 | 0 |
| 1774710385 | 435 | 611 | 0 | 0 | 0 |
| 1774710348 | 435 | 611 | 0 | 0 | 0 |
| 1774710268 | 435 | 610 | 0 | 0 | 0 |
| 1774710226 | 436 | 609 | 0 | 0 | 0 |
| 1774710045 | 435 | 607 | 0 | 0 | 0 |
| 1774709962 | 435 | 606 | 0 | 0 | 0 |
| 1774709896 | 434 | 606 | 0 | 0 | 0 |
| 1774709790 | 436 | 605 | 0 | 0 | 0 |
| 1774702519 | 471 | 596 | 0 | 0 | 0 |
| 1774702295 | 473 | 595 | 0 | 0 | 0 |
| 1774701844 | 470 | 591 | 0 | 0 | 0 |
| 1774701750 | 472 | 590 | 0 | 0 | 0 |
| 1774701622 | 474 | 589 | 0 | 0 | 0 |
| 1774701449 | 470 | 588 | 0 | 0 | 0 |
| 1774701203 | 471 | 585 | 0 | 0 | 0 |
| 1774701063 | 472 | 583 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)