This is the latest recevied telemetry packets stored in our database for station/object YC1SNI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Voltage* | Current* | Value5* |
|---|---|---|---|---|---|
| 1795115725 | 28 °C | 98 %RH | 3 V | 124 mA | 0 |
| 1795113968 | 28 °C | 97 %RH | 3 V | 107 mA | 0 |
| 1795112213 | 28 °C | 96 %RH | 3 V | 115 mA | 0 |
| 1795110458 | 28 °C | 96 %RH | 3 V | 109 mA | 0 |
| 1795108703 | 28 °C | 96 %RH | 3 V | 116 mA | 0 |
| 1795106948 | 29 °C | 96 %RH | 3 V | 109 mA | 0 |
| 1795105193 | 29 °C | 95 %RH | 3 V | 113 mA | 0 |
| 1795103438 | 29 °C | 94 %RH | 3 V | 110 mA | 0 |
| 1795101683 | 29 °C | 92 %RH | 3 V | 114 mA | 0 |
| 1795099928 | 29 °C | 88 %RH | 3 V | 125 mA | 0 |
| 1795099914 | 29 °C | 88 %RH | 3 V | 112 mA | 0 |
| 1795098501 | 29 °C | 86 %RH | 3 V | 110 mA | 0 |
| 1795096746 | 29 °C | 86 %RH | 3 V | 124 mA | 0 |
| 1795094991 | 29 °C | 87 %RH | 3 V | 136 mA | 0 |
| 1795094977 | 29 °C | 88 %RH | 3 V | 115 mA | 0 |
| 1795094200 | 29 °C | 89 %RH | 3 V | 113 mA | 0 |
| 1795092445 | 29 °C | 89 %RH | 3 V | 115 mA | 0 |
| 1795092431 | 29 °C | 89 %RH | 3 V | 123 mA | 0 |
| 1795091918 | 29 °C | 88 %RH | 3 V | 121 mA | 0 |
| 1795090163 | 29 °C | 90 %RH | 3 V | 119 mA | 0 |
| 1795088408 | 29 °C | 87 %RH | 4 V | 122 mA | 0 |
| 1795086653 | 29 °C | 86 %RH | 4 V | 124 mA | 0 |
| 1795086639 | 29 °C | 86 %RH | 4 V | 121 mA | 0 |
| 1795085139 | 29 °C | 91 %RH | 4 V | 109 mA | 0 |
| 1795083384 | 29 °C | 97 %RH | 4 V | 111 mA | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Voltage: 0, 1, 0
Current: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)