This is the latest recevied telemetry packets stored in our database for station/object 9W2FNX-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795128541 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1795128525 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1795128506 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1795128490 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1795128475 | 4.89 VDC | 0 | 0 | 0 | 0 |
| 1795128453 | 4.31 VDC | 0 | 0 | 0 | 0 |
| 1795128437 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1795128422 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1795128406 | 4 VDC | 0 | 0 | 0 | 0 |
| 1795128391 | 4.8 VDC | 0 | 0 | 0 | 0 |
| 1795128375 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1795128360 | 4.69 VDC | 0 | 0 | 0 | 0 |
| 1795128302 | 4.86 VDC | 0 | 0 | 0 | 0 |
| 1795128286 | 4.38 VDC | 0 | 0 | 0 | 0 |
| 1795128271 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1795128255 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1795128239 | 4.46 VDC | 0 | 0 | 0 | 0 |
| 1795128224 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1795128175 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1795128160 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1795128145 | 4.29 VDC | 0 | 0 | 0 | 0 |
| 1795128115 | 4.79 VDC | 0 | 0 | 0 | 0 |
| 1795128100 | 3.9 VDC | 0 | 0 | 0 | 0 |
| 1795128085 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1795128034 | 4.6 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)